GM Truck Club
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 2 of 2
  1. #1

    Default What 6" lift least intrusive to towing?

    I'm lifting my 2010 Sierra and putting some 35s on it. Is there a lift that is better in terms of towing? I just don't want to give a lot up on stability. I'd seen gas shocks and spiffy expensive upgrades to some of the bigger lift kit manufacturers. Is all that necessary?
    2010 GMC Sierra SLT Crew Cab Midnight Blue
    Flowmaster catback, Readylift leveling kit, Line X

    Lost my Hemi Orange Challenger R/T in the trade:frown:

  2. #2


    Regardless of the choice of 6" lift I would:
    • Add some helper springs (a la Roadmaster Active Suspension) to reduce body roll in both loaded and unloaded conditions. It helps on non-lifted trucks and is even more useful on lifted trucks ... and is a sane 350 clam upgrade as long as you're not sand dune hopping or mud bogging.
    • Use an adjustable drop hitch to allow you to level out your towed load so that it is as level as you can get it (and, thus, catches minimal wind from underneath it). I personally use a Rapid Hitch with a 10" adjustable drop; I tried the 6" drop and it wasn't low enough for some smaller/lower trailers.
    Last edited by SurrealOne; 08-17-2012 at 07:36 PM.

Similar Threads

  1. Rough Country 2" lift coils and 4" lift spindles
    By Blue97chevy in forum Lifted & Offroad Suspension
    Replies: 16
    Last: 01-12-2014, 08:07 PM
  2. Replies: 0
    Last: 08-03-2012, 07:30 PM
  3. Replies: 0
    Last: 01-02-2012, 11:00 AM
  4. Trailer towing with a lift
    By jjjg_02 in forum Lifted & Offroad Suspension
    Replies: 7
    Last: 11-23-2009, 02:02 AM
  5. Rear suspension lift for towing
    By rfoster813 in forum Lifted & Offroad Suspension
    Replies: 5
    Last: 05-14-2009, 03:31 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts