Results 1 to 2 of 2
08-20-2012, 02:43 PM #1
- Join Date
- Aug 2012
- Lakeview, Arkansas
1989 Sliverado K1500 A/C clutch want disengage.
1989 Silverado K1500 the A/C clutch want disengage when the truck is not running and the switch is off. I have the wire harness disconnected from the A/C compressor clutch. If you connect the wire the clutch will engage. I have replaced all three relays ( clutch, high fan, low fan) under the dash, does not have any effect. I discoverd the problem when my battery ran down while the truck was setting for a couple days. Charged the battery and it ran down again. Put a new battery on truck when I connected the cables I noticed the clutch kicked in, knew that was my battery problem. Thanks for any help.
08-20-2012, 10:15 PM #2
- Join Date
- Mar 2006
- Cameron, NC
- Blog Entries
Sounds like you have a crossed up wire somewhere. Start pulling fuses until you find the circuit that is cross feeding power to your compressor. Is it possible that a previous owner rigged a switch to the compressor to bypass the pressure switches? In any case... Pull fuses until the clutch disengages. Then you will have an idea where to look for a wiring problem."It went together didn't it? Well then there has to be a way to take it apart!" - Me.
Check out my image gallery HERE.
"The true measure of a man is how he treats someone who can do him absolutely no good." ~Samuel Johnson (1709-1784)
By ShaneB in forum Chevy Truck Tech ForumReplies: 2Last: 08-17-2012, 07:09 PM
By 89k1500 in forum GM PowertrainReplies: 0Last: 10-24-2011, 05:52 PM
By chevyracingss in forum GM PowertrainReplies: 1Last: 09-19-2011, 04:39 PM
By caljr in forum General Chevy & GM Tech QuestionsReplies: 0Last: 07-14-2010, 02:27 PM
By gt1009 in forum GM PowertrainReplies: 1Last: 12-01-2009, 09:02 AM
Tags for this Thread