Results 1 to 3 of 3
Thread: Throttle body cleaner(s)?
08-22-2012, 03:21 PM #1
Throttle body cleaner(s)?
So I know the difference between the cleaner for the Mass Air Flow sensor (to not use anything else on it).
But the other end at the throttle body, do you have to be as careful? I mean could I potentially use Techron concentrate and a lint free cloth to clean the throttle body?
08-22-2012, 08:32 PM #2
I only use throttle body cleaner. You don't want to use something that will remove the coating inside the throttle body
1995 Silverado 4x4
6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge
2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors, http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
2002 Silverado ext cab 2wd (Sold)
2003 Yukon XL (Totaled)
08-04-2013, 11:40 PM #3
- Join Date
- Jun 2013
- 1391 N Jefferson St., Anaheim CA 92807
Throttle-body cleaning is good preventative maintenance, it should also help engine drivability. Use throttle body cleanser like CRC & soft brush and rubber gloves which is coating safe.Its effort to make driving reliable.
By 95WT in forum Chevy C/K Truck ForumReplies: 2Last Post: 05-09-2011, 07:54 PM
By R3dn3ck in forum General Chevy & GM Tech QuestionsReplies: 14Last Post: 05-03-2011, 08:37 PM
By crane557 in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 12Last Post: 12-16-2010, 06:07 PM
By StevieBlues in forum Performance & FuelReplies: 3Last Post: 04-16-2010, 09:06 PM
By doublej in forum General Chevy & GM Tech QuestionsReplies: 3Last Post: 04-01-2009, 04:08 PM
Tags for this Thread