GM Truck Club
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 9 of 9
  1. #1

    Default Thinking about a 4 inch lift and level suggestions?

    I don't want to get a really tall lift, just enough to raise the truck a little for some different rims and tires. I have seen 6 inch lifts and I like them, but it might be a little taller than what I want.

    What is involved in going with a 4 or 6 inch lift, and do I need more than just a lift kit? I guess I would also level the front of the truck as well at the same time since the 2wd trucks sit lower in the front.

  2. #2


    4X4's are also lower in the front, a friend of mine leveled his truck and when he towed his trailer with the atv's the front was higher then the rear, so he changed it back. As far as a lift goes they are not that easy.
    Ford has a better idea! Drive a GM!

    07 GMC Sierra Classic
    07 Honda Accord EX-L

    68 Camaro (blown)
    2011 Ford F550 V10
    I don't own this truck, I just drive it!

  3. #3


    4 inch will probably be a good height for you. You can fit at least 33s with that. Possibly 35s depending on how much cutting you want to do. Don't combine the lift kit and a level kit imo. Shop around for a lift kit you like. There are several options out there for a 4" so you should be good. As far as what's involved, it depends on the kit, but look on google and you should find options from several vendors.

    To Be Completed (Eventually):
    6" BDS Suspension lift | KingShocks Front and Rear Coil Overs | 4.56 Gears | 35" A/Ts (TBD) | Cervinis 07-12 Silverado Ram Air Hood | Fab Fours Front Winch Bumper (CS07-H2051-1) | Fab Fours Full Size Rear Bumper (CS07-W1850-1) | RX-2 Series Main Grille (Black) | Line-x Bed and wheel wells | Skid Plates | Rizor Automated Tonneau Cover | Custom Bed Insert | RBP RX-3 Series Nerf Bars | Kenwood Excelon DNX9990HD | JL Audio Stealthbox (2x500RMS) | JL Audio HD 1200/1 Class D Mono Amp | JL Audio C5-653 Components (Front) | JL Audio C5-650 Components (Rear) | JL Audio Slash v2 300/4v2 Class A/B Amp

  4. #4


    The lift for most 2wd kits come from the spindles. Doetsch (I think that is how it is spelled) is one kit that looks good. Of course the tire/rim package is a personal thing. Let me know which route you go. If you choose to do it yourself I would be willing to help with the install.

    2011 GMC Sierra SLE - 5.3 - 4X4 - Z71 - King Shock Level Kit - Body Color GMC grill emblem - 2 Tone Engine Cover, Rad Cover and Battery Box - Volant CAI - Tru Cool 40K tranny cooler - Sylvania ZXE bulbs Hi/Low -TriFold Hard Tonneau Cover- CoverCraft Seat Covers - Diablo inTune - GoRecon LED under rail lights - GoRecon LED White Lightning Tailgate Light Bar - Windows tinted to 45%- Kenwood DNX6990 - JL Audio C5-650 &650X- JL Audio Amp- Interco Truxus M/T 33x12.50x18

  5. #5


    I checked them out Alox and they look ok (I don't know enough about lift kits). From looking at their site, I guess I need the lift kit and 4 new shocks? (I get that with a bigger lift the shocks have to be long enough) would my monroe's that I installed be good enough for 4 inches or will the have to be replaced too? and is there anything else I would need?

    Wheels and tires will have to wait a bit..... I can't afford wheels and tires with the lift kit and my tires are practically brand new (10 months old) and they are 70,000 mile tires and I like them . I will need to see if I can shelf my current wheels and tires and get a "winter" set.

    How far away are we talking, Surreals place is not that far away, but I am assuming you have access to a garage with a lift that is far from where I am?

  6. #6


    No lift just a good size bay to work in with jack stands that are tall enough to get the job done. If you have a place by you I would come out to you as long as you have a good set of tools. To answer your question about the Monroes I am pretty sure they will not work with the kit. There are others out there that may be cheaper or less expensive.

  7. #7


    Heh, I was using the mobile phone, yesterday, and thought it was Jeremy's truck being discussed. Nak's local, so this could be fun ... but his garage is crammed with stuff and my apartment lacks a garage (which is why I never turn a wrench, there).

  8. #8


    I wish it were mine being discussed, though I've pretty much settled on a 6 myself. I'm just putting it off until I get back due to the regear, custom tune, etc. There's just a lot involved that I'd rather be involved in.

    And who knows, if the job I find is in that part of the country when I come back maybe we can still do it in Nak's garage. Make a weekend of it.

  9. #9


    Nak can barely fit himself into his garage because it's full of all sorts of stuff. It kinda looks like a bomb went off in there...

Similar Threads

  1. Thinking bout getting new rims... any suggestions???
    By DannyT08 in forum Chevy Truck Talk & GM News
    Replies: 3
    Last: 01-13-2012, 01:57 PM
  2. Suggestions for wheels/tires, and level
    By tylerjrob in forum Chevy Truck Accessories
    Replies: 11
    Last: 08-08-2011, 09:58 PM
  3. thinking about going ccm 2.5 level kit..what else on my 2007 ltz
    By moorebl in forum Lifted & Offroad Suspension
    Replies: 7
    Last: 06-08-2011, 07:24 PM
  4. Thinking about a 3 inch body lift
    By coreyallen11 in forum Lifted & Offroad Suspension
    Replies: 0
    Last: 10-10-2010, 12:50 PM
  5. ReadyLift - front level kit or SST lift/level kit
    By JW2007-6.0 in forum Lifted & Offroad Suspension
    Replies: 8
    Last: 03-13-2010, 02:07 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts