Results 1 to 1 of 1
09-10-2012, 07:21 PM #1
- Join Date
- Sep 2012
- Savannah, Ga / Phoenix, AZ
Oil Pan Gasket Leak. Pull the motor?
I have a 1999 4*4 Tahoe. It was involved in a front end collision and was repaired. However the oil pan gasket has leaked ever since. I paid a shop to fix it about a year after the collision repair, it stopped leaking for about 2 months and then started leaking again. I'm active duty Army and moved shortly after the collision repair in AZ, then shortly again after the oil pan gasket in AL so I couldn't just take it back to the shop. I attempted (twice) to repair it myself. Once with a new gasket and no RTV, once with a new gasket and 2 tubes of RTV.
Both times I had the truck on a lift and used a transmission jack to lift the transmission as far as it would go, however that is just barely far enough to get the oil pan in and out. It's still leaking. I paid $750 to have a few leaks repaired about 6 months ago and really would like to avoid paying another shop.
I'm considering attempting it myself again but am wondering the easiest route: pull the motor or remove the front diff and axle? I'd like to have enough room to really inspect it, clean all the oil and let it dry and set a new gasket with RTV without having to cram it back into that tiny gap.
What's the right way to do this?
By HeavyChevyTom in forum Chevy Silverado Forum (GMC Sierra)Replies: 4Last Post: 07-30-2012, 06:46 AM
By dhpgac in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 8Last Post: 11-01-2011, 12:35 AM
By alanbmx in forum GM PowertrainReplies: 9Last Post: 03-07-2011, 11:33 PM
By phoebeisis in forum General Chevy & GM Tech QuestionsReplies: 4Last Post: 10-12-2009, 09:41 PM
By phoebeisis in forum General Chevy & GM Tech QuestionsReplies: 6Last Post: 05-14-2009, 09:43 PM