Results 11 to 20 of 22
09-11-2012, 08:36 PM #11
I don't know if you have/had a restriction, or not, but I suggested that you look for an restriction in the old thread, http://www.gmtruckclub.com/forum/sho...#axzz26DAzginx you blew me off and opened a second thread. And, I see, with a little searching, that this is thread #3 http://www.gmtruckclub.com/forum/sho...#axzz26DAzginx
You changed the radiator and now it appears to be ok, you probably removed whatever was restricting the air flow when you changed the radiator.
If someone else changed the radiator, you may never know what was causing the problem; but, at least, you could have taken a look to see if there was an restriction, instead of arguing with people trying to help you.Ray
'09 Avalanche LTZ - Black
'05 Envoy XL (sold)
09-11-2012, 08:51 PM #122000 Chevy Silverado 4WD Classic
2'' lift Torsion Keys and air shocks
33/12.50 Hankook Dynapro M/T
3 1/2'' down pipe back 6" Tip
Dodge Towing Mirrors
Smoked Tails, Cab Lights, and Side Marker Lights
1% Rear and Side Window, 20% Front Tint
American Racing Wheels/ With a custom black paint
Cold Air Intake
Edge Performance Chip
Custom Audio System
Black background headlights and parking lights
09-11-2012, 09:02 PM #13
Ok, explaining that and providing this pic might have helped you a couple of threads ago.
That does not look to be installed in the correct location. The idea of a cold air intake is to get air that is not inside the engine compartment.
The opening of the CIA needs to face a hole in the radiator support. When you close the hood, you are closing off the air intake.
Look where the old intake was mounted, there should be a hole in the radiator support. You need to move your CIA to that hole, so the intake can breathe
09-11-2012, 09:24 PM #14
Nope that's how it's supposed to be you can look on all these old bodies that's how they mount. The factory one with the closed in box used to suck from the inner fender. Sorry but you can't tell me it doesn't breath because you can hear the large amount of air getting sucked in.
09-11-2012, 09:36 PM #15
- Join Date
- Dec 2011
- Blog Entries
Still you need to check if the stock intake is blocked in anyway because the CAI if pulling air from there as well and at idle the fan doesn't draw as much air but at speed it does. That's the point @RayVoy is trying to make. the factory air intake tube in the fender that leads to the front of the truck behind the right park light.
Here's a picture:
1996 Chevy Tahoe LT 5.7L V8 4X4 202,000+ miles. Built proudly at Janesville Assembly in Janesville, Wisconsin
Basic mods: Lights all over, bunch of electrical work, and a couple cooling mods.
Check out my other mods in My Garage: http://www.gmtruckclub.com/forum/sho...t-Tahoe-4-Door
09-11-2012, 09:45 PM #16
Thanks for all the input. I figured it out the dealership put the MAF sensor in backwards I pulled it all apart just now and flipped it over and it was backwards
09-11-2012, 09:48 PM #17
that sucks. they even put a direction arrow on those usually. hopefully that fixes it all.David
2004 Silverado 2500 Crew Cab 4x4, AMSOIL EA air filter, Granatelli MAF sensor, Throttle body spacer, Magnaflow exhaust (true dual to 2 in 1 out muffler), 6" ProComp lift (add a leaf and 5" superlift rear block), Bilstein shocks, 35's (Cooper Disoverer ST) and 4.10 gears, Rhino Liner, EGRUSA fender Flares and widow visors, extended stainless steel brake lines, firestone airbags w/onboard air compressor, Pioneer Avic X940BT navigation, Accel backup camera.
1960 Land Rover Series II 88
2002 Nissan Altima (My Commuter)
2013 Toyota Avalon Limited (Wife's Car)
NRA Life Member
09-11-2012, 09:56 PM #18
Yea I would've done it myself but the autoparts store would have taken a week to get in and i needed it that day. Runs perfect now thanks everyone. This forum is a big help
09-11-2012, 10:44 PM #19
At least it was something simple. That's an interesting effect from the MAF sensor being reversed; I'd have expected it to run like crap with the hood open as well as when shut...
09-12-2012, 10:17 AM #20
Me to. That's what was so crazy about all this is it ran great and never had a problem with the performance aspect. Like i said above breaking 33's loose wasn't a problem it was just at idle.(Just to note I don't burnout but does walk a little when it down shifts to pass someone)
By the phantom in forum The Coffee Shop ~ Chit ChatReplies: 42Last Post: 04-29-2012, 02:07 PM
By DCarriker in forum General Chevy & GM Tech QuestionsReplies: 4Last Post: 01-15-2012, 03:14 PM
By Cody Glenn Cornell in forum Lifted & Offroad SuspensionReplies: 16Last Post: 04-26-2011, 11:00 AM
By Bamafan in forum Photo & Video GalleryReplies: 22Last Post: 10-14-2010, 06:46 PM
By 62930-03 in forum Performance & FuelReplies: 4Last Post: 05-12-2008, 01:24 PM