Results 11 to 19 of 19
09-11-2012, 09:41 PM #11
The separator tool is referred to by us old schoolers as a "pickle fork".1994 Chevy K2500 Silverado, 454 (modified), original owner.
And other vehicles and toys.
"...If you can meet with triumph and disaster
And treat those two imposters just the same;
...you'll be a Man, my son!" Rudyard Kipling
09-11-2012, 10:22 PM #12
Just went ahead and bought the pickle fork anyway for the future when/if I have to do this again; only 10$. So tomorrow I will be doing this in the morning and will be getting an alignment later.
If at first you don't succeed, get a bigger cheater bar.
1999 GMC Sierra SLT Z71 | 5.3 "Vortec" | Spectre "Cold Air Intake" | TransDapt TBS | Hypertech 30005 Tune | 2005 Chevy Tail Lights | Denali headlights | Grill Mounted Fog Lights | AWS Bug Shield | 265/70/16 Futura Scramblers | Boss HD Speakers | 2005 Overhead Console | Flowmaster Super 40 mufflers 2N1O | Mostly stock-ish
Bigger Amp Alternator | Electric Fans | Transmission Fluid cooler | Paint (Halfway there)| Interior Restoration/Upgrade with newer model parts | Window Visors (In channel) | Tint | Low-Profile Tool Box | LEDs throughout stock cab locations (68% Done) | And whatever is spurr of the moment
CVN-69 "IKE-ATRAZ" AIR/V-2 Gear Dawgs
09-12-2012, 11:12 AM #13
- Join Date
- Feb 2007
- Blog Entries
1991 Chevy Suburban 1/2 ton 2WD w/ chevy SBC 350-3/4 ton drivetrain upgrade w/4.10 gears 200K miles
2005 Saturn ION-2 Stock 277K miles
1982 Bronco, 1993 Bronco (sold), 1971 M35A2 Deuce and a Half
There are 10 kinds of people, those who understand binary, and those who dont...
Remember kids, the only difference between screwing around and science is writing it down- Adam Savage
09-12-2012, 02:18 PM #14
Well I got them changed out. All I have to do is tighten 12 lug nuts and spend more money for an alignment. Did have a stubborn ball joint on the passenger side; would not tighten down. If I turned the nut, the threads would spin inside of the joint...took a few minutes of head scratching to figure that out as the truck had all the weight on the ball joint. So about 10 wacks on each side of the control arm with a maul and it was good as gold. Took a lunch break to eat some steak and gravy. Kinda anxious to see how it rides now.
Thanks for all yalls help gents
09-12-2012, 02:34 PM #15
Glad to here that the removal and replacement went well.
- - - Updated - - -
1995 Silverado 4x4
6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge
2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors, http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
2002 Silverado ext cab 2wd (Sold)
2003 Yukon XL (Totaled)
09-12-2012, 02:56 PM #16
09-12-2012, 03:02 PM #17
09-12-2012, 03:07 PM #18
09-13-2012, 06:17 AM #19
Good to hear you got it swapped out.
I went to Ace hardware (I know not exactly the mecca of tools) and asked for a 15/16 crow foot and got the same response. They had some hanging on a hook so I showed him what I was talking about they just didn't have the size I needed.
2011 GMC Sierra SLE - 5.3 - 4X4 - Z71 - King Shock Level Kit - Body Color GMC grill emblem - 2 Tone Engine Cover, Rad Cover and Battery Box - Volant CAI - Tru Cool 40K tranny cooler - Sylvania ZXE bulbs Hi/Low -TriFold Hard Tonneau Cover- CoverCraft Seat Covers - Diablo inTune - GoRecon LED under rail lights - GoRecon LED White Lightning Tailgate Light Bar - Windows tinted to 45%- Kenwood DNX6990 - JL Audio C5-650 &650X- JL Audio Amp- Interco Truxus M/T 33x12.50x18
By meborder in forum Chevy C/K Truck ForumReplies: 4Last: 08-04-2012, 07:27 AM
By karroe in forum Chevy C/K Truck ForumReplies: 11Last: 03-01-2012, 11:58 PM
By DarkCherry in forum Chevy Silverado Forum (GMC Sierra)Replies: 1Last: 11-16-2011, 10:02 AM
By bleebs in forum Lifted & Offroad SuspensionReplies: 7Last: 05-02-2011, 03:48 PM
By GlitchMobile in forum How-to GuidesReplies: 2Last: 11-13-2008, 03:32 PM
Tags for this Thread