GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 4 of 4
  1. #1

    Default 1994 K1500 350 4l60e no 1st or 4th after rebuild

    I am trying to verify the electrical is working correctly on this 94 Chevy K1500 350 before putting this 4l60E back together again after my recent rebuild. I pulled the trans pan cover to inspect the solenoids since the truck had no 1st or 4th gear. With the truck ignition in run I took a solenoid I know works and plugged it into the 2-3 shift connector and the solenoid energizes (I hear a click). I take the same solenoid and attach it to the 1-2 shift connector and nothing happens. Both 1-2 and 2-3 leads show 12 V on the voltmeter. The wiring harness in the trans is new(it isn't installed but just plugged into the vehicle harness connector. The 15A trans fuse is good under the steering column. All resistances of the electrical components were verified against the GM published ranges.
    2 different local shops had taken a look at the truck and they said there were no codes. Any help finishing this would be appreciated.

  2. #2

    Default

    The resistances at the 1-2 and 2-3 ecm contacts are different -should they be roughly the same? Values measured with truck ignition in "run" position.Click image for larger version. 

Name:	4l60e_VehicleHarness_Resist-bmp.jpg 
Views:	216 
Size:	74.5 KB 
ID:	43896Click image for larger version. 

Name:	4l60e_WiringHarnessV_Resist-bmp.jpg 
Views:	223 
Size:	67.3 KB 
ID:	43897

  3. #3

    Default

    in ase testing they say there are slippage in some gears if band adjustment is incorrect
    just a thought

    and i would check to see if the wires check out from tranny to tcm {broken wire} ohm them

  4. #4

    Default

    It sounds like the tranny has gone into "limp mode". Could be related to your ever present check engine light from your other thread?
    "It went together didn't it? Well then there has to be a way to take it apart!" - Me.

    Check out my image gallery HERE.



    "The true measure of a man is how he treats someone who can do him absolutely no good." ~Samuel Johnson (1709-1784)

Similar Threads

  1. 4l60e for rebuild
    By jbruch694 in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 1
    Last: 02-14-2012, 05:57 AM
  2. 4l60e rebuild question
    By Pete Japan in forum GM Powertrain
    Replies: 0
    Last: 02-02-2012, 07:36 AM
  3. ATSG 4L60E rebuild Manual
    By 951500 in forum GM Powertrain
    Replies: 1
    Last: 03-30-2011, 05:50 PM
  4. 4L60E Teardown & rebuild
    By 951500 in forum How-to Guides
    Replies: 2
    Last: 12-06-2009, 07:52 AM
  5. 4L60E Teardown & rebuild
    By 951500 in forum GM Powertrain
    Replies: 0
    Last: 12-05-2009, 03:19 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •