GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 8 of 8
  1. #1

    Default Removing Door Panels

    I know, newbie question, but I have searched and have not found a "how to" on removing the door panels on my '99. I broke a few tabs today trying to finesse the passenger side off, so before I do the driver side, any input would be greatly appreciated. Thanks!!
    1993 GMC Suburban K2500, 454 TBI, Baldwin Filters, Towing Mirrors, Magnaflow, HiFlo Cat
    2011 Sundance RV by Heartland



  2. #2

    Default

    I used this guys video's to get my door panels off my 00 and it was right on... So here ya go...
    00 Chevy Tahoe LT, 5.3 4x4

  3. #3
    Master Mechanic
    AMac's Avatar
    Join Date
    Feb 2012
    Location
    New England
    Posts
    944

    Default

    The videos do help but If you're still having trouble go to your local dealer and start asking them questions, they'll pull up the diagram and just say "Hey could you print that out for me?" One day I walked away with schematics for the door panels, front end assembly and rear bumper

    I couldn't get the passenger side off and was wondering what was holding it up the schematics helped me finish the job.




  4. #4

    Default

    Quote Originally Posted by AMac View Post
    The videos do help but If you're still having trouble go to your local dealer and start asking them questions, they'll pull up the diagram and just say "Hey could you print that out for me?" One day I walked away with schematics for the door panels, front end assembly and rear bumper

    I couldn't get the passenger side off and was wondering what was holding it up the schematics helped me finish the job.

    AMAC gets the guys at the parts counter to print off anything she wants when she goes in.

  5. #5

    Default

    Quote Originally Posted by nakranij View Post
    AMAC gets the guys at the parts counter to print off anything she wants when she goes in.
    All one has to do is ask, so if she asks, yes, I bet she does...

  6. #6

    Default

    Thanks for posting the video. I will look at it in the morning and see if I can get somewhere with it. They sure did not make it easy to get it on and off.

  7. #7

    Default

    Quote Originally Posted by AMac View Post
    The videos do help but If you're still having trouble go to your local dealer and start asking them questions, they'll pull up the diagram and just say "Hey could you print that out for me?" One day I walked away with schematics for the door panels, front end assembly and rear bumper

    I couldn't get the passenger side off and was wondering what was holding it up the schematics helped me finish the job.
    Now the real question is, have you scanned the schematics yet?

    To Be Completed (Eventually):
    6" BDS Suspension lift | KingShocks Front and Rear Coil Overs | 4.56 Gears | 35" A/Ts (TBD) | Cervinis 07-12 Silverado Ram Air Hood | Fab Fours Front Winch Bumper (CS07-H2051-1) | Fab Fours Full Size Rear Bumper (CS07-W1850-1) | RX-2 Series Main Grille (Black) | Line-x Bed and wheel wells | Skid Plates | Rizor Automated Tonneau Cover | Custom Bed Insert | RBP RX-3 Series Nerf Bars | Kenwood Excelon DNX9990HD | JL Audio Stealthbox (2x500RMS) | JL Audio HD 1200/1 Class D Mono Amp | JL Audio C5-653 Components (Front) | JL Audio C5-650 Components (Rear) | JL Audio Slash v2 300/4v2 Class A/B Amp

  8. #8

    Default

    I am pretty sure that you can buy replacement clips at autozone. They should be in the "HELP" packages

    1995 Silverado 4x4
    6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
    4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge

    2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors, http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
    2002 Silverado ext cab 2wd (Sold)
    2003 Yukon XL (Totaled)

Similar Threads

  1. Door panels?
    By M-technik-3 in forum Chevy Tahoe Forum (GMC Yukon, Cadillac Escalade)
    Replies: 9
    Last: 08-06-2012, 06:18 AM
  2. Replacement Door Panels or Door Armrests
    By deppaz in forum Member Introductions
    Replies: 6
    Last: 07-26-2012, 04:19 PM
  3. removing interior doors panels
    By orange f7 snopro in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 4
    Last: 03-06-2010, 01:17 AM
  4. door panels
    By 03 Black Sunshine in forum Audio, Video & Gadget Tech
    Replies: 5
    Last: 11-09-2009, 06:08 PM
  5. 92 Door Panels
    By alex16 in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 11
    Last: 10-03-2007, 01:17 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •