1975 chevy 3/4 ton 2x4 with 1986 350... stall troubleshoot..

Discussion in 'GM Powertrain' started by dazmolek, Aug 17, 2011.

  1. dazmolek

    dazmolek New Member

    Hi everyone,
    I have a 75 chevy with a 350 out of a 86 GMC (if it makes any difference). The other day i drove it until the truck was warmed up, shut it off and started it within 5 minutes and went again. When coming to a stop sign it stalled out on me and wouldnt start. Drained the battery trying to start it. I pulled it home which was a mile away and it still wouldnnt start with the battery charger, just turned over and over. Around 5 or 6 hrs later i went to start it and it fired right up. So my question is obviously what made it stall out? please help! Thanks!!
     
  2. Crawdaddy

    Crawdaddy ↑↑↑ Has no life Staff Member 5+ Years 1000 Posts Platinum Contributor

    There is an ignition module under the distributor cap that is notorious for producing issues like you described. I can't recall its proper name at the moment, but that would be the first place I'd look.
     

Share This Page

Newest Gallery Photos