1. Welcome To GMTruckClub.com!

    The #1 Chevy Truck Forum Online
    Online since 2004, we are the #1 Chevy Truck & SUV forum and user community. If you have any questions about your Chevy or GMC Truck, SUV or Crossover, or just want to connect with other GM owners and enthusiasts around the world, you've found the best place on the internet to do that.

    Join Today ~ It's Free
    Registering is Free and Easy! Hope to see you on the forums soon!

1990 k2500 transmission questions

Discussion in 'GM Powertrain' started by bullit70, Nov 1, 2009.

  1. bullit70

    bullit70 New Member

    Hello. As my first post i thought i would ask something about my new truck. the truck has what i think is the th400 3 speed or a th 350 trans with the 241 trasfer case. nothing wrong with the transmission but i would like to have an over drive. So i was thinking about putting in a 700-r4 witch are every were, and easy to build up. if i were to go with the change out what else would i need to change other than getting the adapter plate for the transfer case. the truck is a 1990 k2500 4x4 with a good old chevy 350 tbi.

    thank you all and looking forward to learning.
  2. Jimmiee

    Jimmiee New Member 1000 Posts 100 Posts

    Welcome to GMTC! You will need to change the flywheel, transmission including correct output shaft to match your transfer case, torque converter, dipstick, dust cover, drive shaft lengths, TV cable, and relocate the cross member.

Share This Page