1995 - lost my AC and my defrost/floor adjuster at the same time

Discussion in 'Audio, Video & Gadget Tech' started by lfreng, Jan 9, 2008.

  1. lfreng

    lfreng New Member

    could this be related to a faulty dash unit. Are these functions electrically controlled or vacuum actuated?
     
  2. collinsperformance

    collinsperformance Epic Member 5+ Years 500 Posts

    I bet this is the issue....
    [​IMG]
    the gears break teeth and fail to work.
    [​IMG]
    the one you need to replace it the easiest to repair. it is right behind left side of the glove box. you can remove the glove box and see if the motor has a good connection or is just spinning and not changing the air direction. this is the same motor as the hot/ cold temp door and the fresh or recycle door and the same unit in the back air handler. goto a junk yard and get a replacement. if the issue is fixed eather get a new part or leave that one in untill it dies. i got one year out of the last one i swapped....mike
     
  3. lfreng

    lfreng New Member

    would I hear that motor turning if it did have missing teeth? I dont here anything at all when I turn the control knob.
     
  4. collinsperformance

    collinsperformance Epic Member 5+ Years 500 Posts

    if enouh teeth are gone you almost can not hear the motor. you might have lost the switch. if you got a volt meter see if the door motor is getting power if so bad motor if not bad switch....mike
     

Share This Page

Newest Gallery Photos