2001 Jimmy 4.3L Oil Problem

Discussion in 'Chevy Blazer Forum (GMC Jimmy)' started by 3dogs, Jun 1, 2013.

  1. 3dogs

    3dogs New Member

    I just finished rebuilding the engine and have primed the oil system, but am not getting any oil to the #6 exhaust rocker arm (rear most rocker arm on right side-pax side. I have taken the lower intake manifold off and checked everything to include changing the lifter with another one - they are all new. The lifters were soaked in oil before being installed . I have an oil gage installed and show 40 psi.
    I have also been rotating the engine over while priming .

    Would greatly appreciate any help as to how to fix the problem.

    Thanks

    - - - Updated - - -

    I have removed the intake manifold again and taken the lifter out, Checked the oil holes on each side of the lifter and into the ditributor hole, All clear, Any help is appreciated
     

Share This Page

Newest Gallery Photos