1. Welcome To GMTruckClub.com!

    The #1 Chevy Truck Forum Online
    Online since 2004, we are the #1 Chevy Truck & SUV forum and user community. If you have any questions about your Chevy or GMC Truck, SUV or Crossover, or just want to connect with other GM owners and enthusiasts around the world, you've found the best place on the internet to do that.

    Join Today ~ It's Free
    Registering is Free and Easy! Hope to see you on the forums soon!

94 Jimmy.....Fan Fuse Location?????

Discussion in 'Audio, Video & Gadget Tech' started by Dj Friction, Feb 9, 2008.

  1. Dj Friction

    Dj Friction Rockstar 100 Posts

    Well.........I'm stumped!!!!!!!

    My son has a 1994 Jimmy that the fan A/C controls stopped working. Along with it was the lighter and courtesy lights do not work either.

    I took a quick look for the fan blower fuse and could not locate it. I tested the fan and it works.

    Question One.......Fan Switch????

    Fuse????

    Question Two........ If so Location?????

    Thanks for the help......it's not like my 95 Blazer!!!!!!


    Help!!!!!


    Thanks
  2. unplugged

    unplugged Epic Member 5+ Years 1000 Posts

    There are two a/c blower relays. High and Low. Autozone's website lists many component locations.

    Both the relays are located:


    Front seating area, center, under dash, mounted in relay block above heater-A/C case

    Sounds like you may have more than one problem. You should check the fuses for the courtesy lights and cig lighter. Replace them as needed, but if those fuses are good, you may have a short somewhere underdash.
  3. Dj Friction

    Dj Friction Rockstar 100 Posts

    Well........

    I traced down the relay's for the Heater A/C .............tested to be OK!!!!!!

    Tested the fuse block and all is OK there.........

    Sounds like it may be the dreaded.........Short.......

    Any other idea's...............Maybe I'll check the switch......but that does not explain the lighter and lights......

    Well.........I'll be back..........maybe not today .....on any solutions!!!!!

Share This Page