94 pickup sbc 350-engine issues

Discussion in 'Member Introductions' started by vortec 350, Nov 1, 2012.

  1. vortec 350

    vortec 350 New Member

    Hey guys, kinda new to these forums. I have a 94 chevy pickup that we just rebuilt. Bored 40 over with vortec heads, roller lifters, and roller rockers. When we start the engine it idles and run awesome, but when you go to romp it, it falls on its face. We checked the MAP sensor, rebuilt the throttle body, checked the timing, and checked the vacuum lines. Can't figure it out. I should tell you that this issue was present with the old engine as well. We thot that we would get the new engine in and see if that would help. Not sure if we have a badf computer or fuel flow problems or what. Def could use some help./ Thx
     
  2. donyms

    donyms Rockstar 4 Years ROTM Winner 1000 Posts

    Welcome to the club, it' good to have you aboard. Try posting in the Tech portion of the forum and you may have better luck getting the help you need. Good luck :sign0016:
     
  3. SurrealOne

    SurrealOne Former Member ROTM Winner 1000 Posts

    Welcome! :great:
     
  4. Curky

    Curky Active Member 2 Years 1000 Posts

  5. retired2001

    retired2001 Epic Member 5+ Years 5000 Posts

    Welcome to the G M T C !
     

Share This Page

Newest Gallery Photos