1. Welcome To GMTruckClub.com!

    The #1 Chevy Truck Forum Online
    Online since 2004, we are the #1 Chevy Truck & SUV forum and user community. If you have any questions about your Chevy or GMC Truck, SUV or Crossover, or just want to connect with other GM owners and enthusiasts around the world, you've found the best place on the internet to do that.

    Join Today ~ It's Free
    Registering is Free and Easy! Hope to see you on the forums soon!

'95 Auto Transmission Filter Seal? [Expired Topic]

Discussion in 'Chevy Suburban Forum (GMC Yukon XL)' started by Chris, Jul 16, 2005.

Thread Status:
Not open for further replies.
  1. Chris

    Chris New Member

    Hello... Chris Cobb here from San Jose CA

    Changed the transmission fluid today on my '95 Sub. Could not get the new filter seal all the way into the pump bore. Left about 1/8" out. Does anyone know if this will be a potentail problem. Instructions say it MUST be in all the way.

    Thanks

    Chris Cobb
  2. Guest

    Guest Guest

    HeyChris, you should definately try and get that filter all the way in. Sometimes twisting it while you push will help. If it's not all the way in, then it's not seated, and can eventually vibrate loose. The filter has two functions. obviously it filters, but it also acts as part of a sump. if the filter is not in the tranny will not be able to pump fluid properly, and in addition could suck large particles(should they exist) into the tranny's finely precision tuned components. That could be Ugly!!! :shock:
  3. ChevyFan

    ChevyFan Administrator Staff Member 1000 Posts

    Hey Chris, just wondering if you've had any more problems with your filter seal.
Thread Status:
Not open for further replies.

Share This Page