1. Welcome To GMTruckClub.com!

    The #1 Chevy Truck Forum Online
    Online since 2004, we are the #1 Chevy Truck & SUV forum and user community. If you have any questions about your Chevy or GMC Truck, SUV or Crossover, or just want to connect with other GM owners and enthusiasts around the world, you've found the best place on the internet to do that.

    Join Today ~ It's Free
    Registering is Free and Easy! Hope to see you on the forums soon!

95 Burb - Upper Control arm bushing

Discussion in 'General Chevy & GM Tech Questions' started by jtwh20, Apr 13, 2009.

  1. jtwh20

    jtwh20 Member

    Hey guys,

    I have a 95 burb 1500 4x4. While putting brakes on this weekend, I noticed that the upper control arm has about 1/2 inch play and makes a knocking sound.

    I have looked up the repair, and it "seems" simple enough?, but it doesn't mention if the bushings need to be pressed in, but I've seen other similar repairs that do.

    Do you guys know if they do need to be pressed in, and if this job can be done in a garage with a couple of wrenches and a ball joint puller and some choice swear words - I don't want to replace the ball joint as it still seems OK.

    Thanks in Advance!!!


Share This Page