Abs/service stability

Discussion in 'Chevy Suburban Forum (GMC Yukon XL)' started by JETHRO271, Dec 12, 2011.

  1. JETHRO271

    JETHRO271 New Member

    Question guys and gals. Maybe someone has run into this issue before. Recently my ABS light and No Traction light and the "Service Stability" in the DIC come on during a left hand turn. They go away as soon as I straighten the wheel. Anyone ever seen this, where should I start looking?
     
  2. TRPLXL2

    TRPLXL2 Epic Member 5+ Years 1000 Posts Platinum Contributor

    That's a tell tale sign for a wheel hub abs sensor/bearing unit. I have an oldsmobile Alero that did the same thing, all 3 lights would come on at the same time. ABS/TRAC OFF/ CHECK ENGINE
     
  3. JETHRO271

    JETHRO271 New Member

    Thanks. That is the same thing the mechanic said today when I took it in. And of course the sensor is actually inside the wheel hub assembly so I have to replace the whole thing. Mechanic said it would be about $300 including parts and install.
     
  4. TRPLXL2

    TRPLXL2 Epic Member 5+ Years 1000 Posts Platinum Contributor

    What type of vehicle is it for? I just put a wheel hub on a 2003 envoy 4x4, the part was $89.00. Glad your going to get it fixed.
     
  5. JETHRO271

    JETHRO271 New Member

    Its a 2006 Burb. Yep, glad I am getting it fixed also. It gets kind of annoting when it happens every time I make a left turn, LOL.
     

Share This Page

Newest Gallery Photos