adjusting the door

Discussion in 'General Chevy & GM Tech Questions' started by bensdive, May 10, 2008.

  1. bensdive

    bensdive New Member

    Hi
    would like to know how to adjust the door on a suburban 1990 Aust As my sister door has drop about 1/4in
    And will not shut
    Thank you for your time
    All the best
    Ben
     
  2. LANDBARG

    LANDBARG Rockstar

    You will need to loosen the door hinges and re-align. Make sure you have a few people to help. But, with that said, why is the door that low? Was it loosened or taken off recently? if not, then the first thing to do would be to install new door hinge pins and bushings. Common for them to go bad over the years, what with the weight of the door and opening and closing it a million times.
     
  3. collinsperformance

    collinsperformance Epic Member 5+ Years 500 Posts

    i had this same issue--it is old tired hing pins----i try to do a writeup--it is an easy fast swap....mike
     

Share This Page

Newest Gallery Photos