1. Chevy Truck Forum

    Welcome To GMTruckClub.com!

    The #1 Chevy Truck Forum Online

    Online since 2004, we're the #1 Chevy Truck & SUV user community. If you have any questions about your Chevy or GMC Truck, SUV or Crossover, or just want to connect with other GM owners and enthusiasts around the world, you've found the best place on the internet to do that.

    Join Today ~ It's Free

    Registering is Free and Easy! Do it today and we'll see you on the forums soon!

Bilstein 5100 shocks

Discussion in 'Lifted & Offroad Suspension' started by devilsalmostfree, Feb 19, 2010.

  1. devilsalmostfree

    devilsalmostfree Rockstar 100 Posts

    i have a tacoma, over on tacoma world those guys really like billy 5100's (an over all good rating from those guys). so im wanting to put a set (all 4) on my GMC. so i found them for the sierra, i already have torsion bar keys on my truck, im going to try & re-adjust them for my full 2" lift, then go with these 5100 shocks, what do u guys think? will it work, do i need to leave then at the 0 hieght, or what? thanks in advance! heres a link, http://www.allshocks.com/order.asp
  2. devilsalmostfree

    devilsalmostfree Rockstar 100 Posts

    nobody has used these on the trucks?
  3. Jacqson

    Jacqson Rockstar 100 Posts

    If you're going to get a set of the Bilstein's, pick up a set that is about 2-4" longer than stock. The stock shocks once you crank the front, even 1", are too short and limit the down travel of your front suspension.
  4. devilsalmostfree

    devilsalmostfree Rockstar 100 Posts

    thanks for the info!

Share This Page