Blacked out tail lights

Discussion in 'Chevy Truck Accessories' started by josh_1470, Feb 23, 2013.

  1. josh_1470

    josh_1470 New Member

    I use VHT nightshade. I wet sand with 2000 grit sand paper first then used a degreaser to take anything left on there. Next was 4 coats of the VHT and then 3 coats of clears coats followed by a final light wet sand then waxed and buffed it out. I think it turned out pretty good.

    View attachment 49744 Before

    - - - Updated - - -

    Well that didn't work it won't let me post the before pictures
     

    Attached Files:

  2. Enkeiavalanche

    Enkeiavalanche Rockstar 4 Years ROTM Winner 5000 Posts

    :great: Good job...
     
  3. SurrealOne

    SurrealOne Former Member ROTM Winner 1000 Posts

    Looks good. Can they be seen at 500' when lit? I ask because that's usually the distance required for street legality.
     
  4. josh_1470

    josh_1470 New Member

    Thanks and yeah it's visibly seen from 500' I think anything over 4 coats would be pushing it
     

Share This Page

Newest Gallery Photos