GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER

camber kit

Discussion in 'Chevy Truck Talk & GM News' started by RAV52202, Jan 19, 2012.

  1. RAV52202

    RAV52202 New Member

    Joined:
    Dec 16, 2011
    Messages:
    137
    Likes Received:
    0
    I have a 1996 chevy cheyenne. When i crank my torsion bars up the out side of my tires chew right off. My question is can i just get away with doing a camber kit?
    #1
  2. RAV52202

    RAV52202 New Member

    Joined:
    Dec 16, 2011
    Messages:
    137
    Likes Received:
    0
    Has anyone done a camber kit?
    #2
  3. Revredneck

    Revredneck New Member

    Joined:
    Jun 7, 2011
    Messages:
    208
    Likes Received:
    1
    The camber kit is intended to allow the truck to be aligned. Actually, you have to knock the plugs out of the alignment slots in the frame before you put the kit in so you can adjust the alignment. It's not very hard to do, but you will need to get it aligned when you're done.
    Good Luck and God Bless
    #3
  4. RAV52202

    RAV52202 New Member

    Joined:
    Dec 16, 2011
    Messages:
    137
    Likes Received:
    0
    Thank you for the info.
    #4
  5. BrownPats420

    BrownPats420 New Member

    Joined:
    Sep 2, 2011
    Messages:
    225
    Likes Received:
    0
    the camber pins fell out when i did mine, i couldnt beleive it, never saw that before.
    #5

Share This Page