Engine component needs to be identified

Discussion in 'Chevy C/K Truck Forum' started by Cableguy, Jan 17, 2009.

  1. Cableguy

    Cableguy Epic Member 5+ Years ROTM Winner 1000 Posts

    Another one for ya.
    1996 GMC Vortec 350, on the passenger side of block just before pan and about middle of block. There is a sensor of some sort looks like single wire coming out. I have a small oil leak from there. Is it the knock sensor or what?
     
  2. mehoff400

    mehoff400 Rockstar 100 Posts

    sounds like maybe it could be the oil pressure sending unit
     
  3. Cableguy

    Cableguy Epic Member 5+ Years ROTM Winner 1000 Posts

    Thanks bro, is it that low on the block?
     
  4. Davandy

    Davandy Moderator 5+ Years ROTM Winner 1000 Posts

    Hey Jamie, I'm sure it's the knock sensor. :rules:
     
  5. Cableguy

    Cableguy Epic Member 5+ Years ROTM Winner 1000 Posts

    Ok so now we have a Mexican stand off...
     
  6. dwill3015

    dwill3015 Epic Member 5+ Years ROTM Winner 1000 Posts

    Jamie, Jamie, Jamie.
    You MUST still be mad I drank all your beer or you would have looked in the repair manuals section in the Q&A thread for the answer...
    [​IMG]
     
  7. Cableguy

    Cableguy Epic Member 5+ Years ROTM Winner 1000 Posts

    I used your link to check that???? Thanks, so it is the knock sensor

    Oh for the love of gawd, I'm retarded
    [​IMG]
     
  8. dwill3015

    dwill3015 Epic Member 5+ Years ROTM Winner 1000 Posts

    Peter still deserves the credit, I only confirmed it LOL!
     
  9. Cableguy

    Cableguy Epic Member 5+ Years ROTM Winner 1000 Posts

    Thanks guys :great:

    The King of Belgium strikes again. WTG, Peter
     
  10. Davandy

    Davandy Moderator 5+ Years ROTM Winner 1000 Posts

    Thanks, by the way nice picture of you Jamie :rofl:
     

Share This Page

Newest Gallery Photos