engine won't start after swap please help

Discussion in 'Chevy C/K Truck Forum' started by Garrett_schmidt, Feb 2, 2013.

  1. Garrett_schmidt

    Garrett_schmidt New Member

    Recently my 350 in my 76 truck started making a knock so I pulled it. I put in a 86 350 everything is hooked up and the engine turns, however it doesn't start or make any attempt too. I the things I thought to check where spark and fuel, the engine was receiving both, but it never seems to ignite even with starting fluid there's not even a pop. Please help it would be much appreciated thanks.
     
  2. RayVoy

    RayVoy Well-Known Member 2 Years 1000 Posts

    You probably have the distributor out of time and firing on the exhaust stroke and not the compression stroke.
     

Share This Page

Newest Gallery Photos