Factory roof top luggage rack for Chevy Suburban

Discussion in 'General Chevy & GM Tech Questions' started by fatman44, Mar 20, 2013.

  1. fatman44

    fatman44 New Member

    just picked up my 99 k1500 Suburban, prior owner(s) had removed factory roof rack. I have found one but have to pull it myself. Does anyone happen to know if the mounting screws/bolts are allen, phillips, torx...?
  2. ChevyFan

    ChevyFan The Sheriff Staff Member 5+ Years 1000 Posts

    You're getting one from a salvage yard and putting it on, or is this a kit with new screws and etc?
  3. fatman44

    fatman44 New Member

    Pulling it from salvage yard
  4. RayVoy

    RayVoy Epic Member 5+ Years 5000 Posts

    I had mine apart to add cross bars, it was torx, but I don't recall the size.

    99'HEARTBEAT MODERATOR Staff Member 5+ Years ROTM Winner 1000 Posts Platinum Contributor

    In the Diagram, Number's....#13 and #14, looks like they are the Mounting Bolts.....Ray Voy can Confirm or Correct me on this??

    Here are the Size's of those Bolts,
    Number #13.....
    BOLT LUGG CARR.....(M6X1X42MM)
    Number #14.....BOLT LUGG CARR.....(M6X1X62)
  6. ChevyFan

    ChevyFan The Sheriff Staff Member 5+ Years 1000 Posts

    oh, i guess i could have read that you have to pull i.
  7. FormulaGT

    FormulaGT New Member

    So, were you able to pull and install the roof rack? How did it go?

Share This Page

Newest Gallery Photos