1. Welcome To GMTruckClub.com!

    The #1 Chevy Truck Forum Online
    Online since 2004, we are the #1 Chevy Truck & SUV forum and user community. If you have any questions about your Chevy or GMC Truck, SUV or Crossover, or just want to connect with other GM owners and enthusiasts around the world, you've found the best place on the internet to do that.

    Join Today ~ It's Free
    Registering is Free and Easy! Hope to see you on the forums soon!


Discussion in 'Lifted & Offroad Suspension' started by 07 redrado, Feb 5, 2008.

  1. 07 redrado

    07 redrado Rockstar

    i have 3.42 gears and was thinking about going to some 3.72s. do i have to replace the front gears also? i dont know much about gears and all so any help would be great
  2. 95CTburb19

    95CTburb19 Epic Member 5+ Years 1000 Posts

    Yep you need to do the front gears too. Otherwise when you run it in 4 wheel drive the front and the rear axles will want to spin at different rates. This causes all kinds of problems.
  3. finalday7

    finalday7 Epic Member 5+ Years ROTM Winner 1000 Posts

    Yeah you have to do both. It doesn't have to be too expenisive buy labor will cost you. You can find some 3.73's on accuautoparts.com for about 140 a set but you'll have to buy probly 2 master install kits as well there about 75 bucks a piece and install will run you between 450 and 900.. So I'd say you'll be looking at around 1100 bucks. Hope this helps :great:
  4. 07 redrado

    07 redrado Rockstar

    thanks guys. this help me decide to wait for a while. id rather spend the money on other mods for horse power and off road ability. but thanks again

Share This Page