1. Welcome To GMTruckClub.com!

    The #1 Chevy Truck Forum Online
    Online since 2004, we are the #1 Chevy Truck & SUV forum and user community. If you have any questions about your Chevy or GMC Truck, SUV or Crossover, or just want to connect with other GM owners and enthusiasts around the world, you've found the best place on the internet to do that.

    Join Today ~ It's Free
    Registering is Free and Easy! Hope to see you on the forums soon!

Grab Handles

Discussion in 'General Chevy & GM Tech Questions' started by tudorstyle, Sep 20, 2011.

  1. tudorstyle

    tudorstyle New Member

    I'm re-doing the interior of an 88' Sierra. I wanted to put a grab handle over the passenger side door and I needed to know if it should be reinforced or can I just drill some holes and go?? Stephanie
  2. silveradotrailblazer

    silveradotrailblazer New Member ROTM Winner 1000 Posts

    I know in the '90's and up trucks the factory put grab bars mounts in all the trucks even though all the trucks didn't come with grab bars. I'm not sure about the '88's. When you get the interior out look for welded-in mounts in the roof and the windshield beam.
  3. tudorstyle

    tudorstyle New Member

    I looked and there aren't any holes for a handle.
  4. silveradotrailblazer

    silveradotrailblazer New Member ROTM Winner 1000 Posts

    Of course not, that would be to easy. Sorry I never did any grab bars on a '88 year.

Share This Page