Newest Gallery Photos

  1. Welcome To GMTruckClub.com!

    The #1 Chevy Truck Forum Online
    Online since 2004, we are the #1 Chevy Truck & SUV forum and user community. If you have any questions about your Chevy or GMC Truck, SUV or Crossover, or just want to connect with other GM owners and enthusiasts around the world, you've found the best place on the internet to do that.

    Join Today ~ It's Free
    Registering is Free and Easy! Hope to see you on the forums soon!

Grease fitting (zerk) locations for 1999 through 2006 GM trucks (GMT800)

Discussion in 'General Chevy & GM Tech Questions' started by jbeall, Nov 26, 2012.

  1. jbeall

    jbeall Rockstar 100 Posts

    Been searching on this, and didn't find anything on this site, but I found something elsewhere. I thought I would post here in case anyone else is like me and is wondering if they're finding all the zerks :)

    1 - Drivers side, Upper ball joint
    2 - Drivers side, Outer tie-rod end
    3 - Drivers side, Lower ball joint 4 - Drivers side, Inner tie-rod end
    5 - Drivers side, Pitman arm (at relay rod)
    6 - Passengers side, Idler arm (at relay rod)
    7 - Passengers side, Upper end of idler arm mount
    8 - Passengers side, Inner tie-rod end
    9 - Passengers side, Lower ball joint
    10 - Passengers side, Outer tie-rod end
    11 - Passengers side, Upper ball joint


    Source: this post:
    http://www.truckmodcentral.com/forums/showthread.php?t=1320

    Complete with helpful pictures!

Share This Page