injector dilema

Discussion in 'General Chevy & GM Tech Questions' started by minoa, Jul 26, 2009.

  1. minoa

    minoa New Member

    hello
    i have a 95 blazer 4.3l that i am pretty sure needs a new spider. the problem i am having is trying to decide which cpi to go with. oe vs. reman. acdelco vs. delphi on the high end. with gp and others on the lower end. I even saw an ad from thepartsladi on ebay that had an oe acdelco cpi with a delphi nut kit for $325.
    i just want to know if there is anything in particular that i should avoid.

    any suggestions would be greatly appreciated
     
  2. Jimmiee

    Jimmiee Epic Member 5+ Years 1000 Posts

    On jobs like that where there is a lot of work required to change the part I always go with AC Delco. If it bolts on the outside and it doesn't work then that's another story. You have to ask yourself if you are willing to do it twice.
     
  3. minoa

    minoa New Member

    I was thinking about going with the ac-delco part. you are right, i only want to do this job one time. It is probably gonna take me the better part of a day to get this job done seeing how im new at the diy stuff. Thanks for the advice
     

Share This Page

Newest Gallery Photos