Need Help Voltage drops and engine stalls when brakes are applied

Discussion in 'Chevy Silverado Forum (GMC Sierra)' started by 96BlackSilverado, May 27, 2010.

  1. 96BlackSilverado

    96BlackSilverado New Member

    I went to drive my truck today and started it up and when I hit the brakes it dies sometimes and is hard to start back up. Is it a vacuum leak in the brake system?
     
  2. murdog94

    murdog94 Epic Member 5+ Years 5000 Posts

    Sounds like you have a vacum leak.. is the CEL on?? If so the codes might help some.. Since the IAC and or else the TPS might not be communicating and increasing the idle when you hit the brakes.
     

Share This Page

Newest Gallery Photos