1. Welcome To GMTruckClub.com!

    The #1 Chevy Truck Forum Online
    Online since 2004, we are the #1 Chevy Truck & SUV forum and user community. If you have any questions about your Chevy or GMC Truck, SUV or Crossover, or just want to connect with other GM owners and enthusiasts around the world, you've found the best place on the internet to do that.

    Join Today ~ It's Free
    Registering is Free and Easy! Hope to see you on the forums soon!

Need some help identifying some rocker switches on the dash

Discussion in 'Chevy Truck Talk & GM News' started by Nitro_Alltrac, Jul 16, 2013.

  1. Nitro_Alltrac

    Nitro_Alltrac New Member

    I've got an 03 Suburban LT and I need a little help. Mine has the two storage bins in the dash above the console. Immediately to the left of the bottom one (the deeper one) there are two round rocker switches that appear to be factory. The bezels around them are molded into the panel. Anybody have an idea of what these are for? I've switched them back and forth and don't notice anything happening.


    I apologize for not have pictures at the moment. I'll get some here in a little while so it will be more clear what I'm talking about.
  2. stchman

    stchman Active Member 1 Year 1000 Posts

    Please give us a picture.
  3. Nitro_Alltrac

    Nitro_Alltrac New Member

    Sorry for the delay. I had to go out of town before I could get the pic posted. Here's what I've got. [​IMG]
  4. stchman

    stchman Active Member 1 Year 1000 Posts

    I downloaded the 2003 Suburban manual and there was no mention of those switches. I agree, they do look factory, but then again the manufacturer labels switches.

    I am sorry I cannot be of more help.
  5. Nitro_Alltrac

    Nitro_Alltrac New Member

    I couldn't find them in the manual either. Wasn't sure if this was something that came in mid cycle or what.
  6. Enkeiavalanche

    Enkeiavalanche Rockstar 4 Years ROTM Winner 5000 Posts

    They are NOT factory... Do you have a DVD screen over head? If so it may be for a RF mod so you can hear the dvd's on your system Other then that take the panel off and see where they go..
  7. Nitro_Alltrac

    Nitro_Alltrac New Member

    No DVD. I'm planning on doing that, just haven't gotten to it yet. They don't seem to be powered at the moment. It looks like there are little lights in the bottom of the switch but they don't light up when switched.
  8. RayVoy

    RayVoy Well-Known Member 2 Years 1000 Posts

    We all suspect that they were added by a previous owner; therefore, the wiring should be somewhat easy to follow. Can you trace it to a source, or termination?

Share This Page