Newest Gallery Photos

  1. Chevy Truck Forum

    Welcome To GMTruckClub.com!

    The #1 Chevy Truck Forum Online

    Online since 2004, we're the #1 Chevy Truck & SUV user community. If you have any questions about your Chevy or GMC Truck, SUV or Crossover, or just want to connect with other GM owners and enthusiasts around the world, you've found the best place on the internet to do that.

    Join Today ~ It's Free

    Registering is Free and Easy! Do it today and we'll see you on the forums soon!

Need some help with a serpentine belt

Discussion in 'Chevy Suburban Forum (GMC Yukon XL)' started by Kraziken, Nov 24, 2007.

  1. Kraziken

    Kraziken Rockstar 100 Posts

    I've loosened the tensioner pulley bolt. I can see it's moved a little, but the belt is still tight. Is the tensioner supposed to rotate out of the way?

    My Chilton's guide just says to loosen the tensioner and remove the belt, but something isn't quite right here.

    Thanks
     
  2. Crawdaddy

    Crawdaddy ↑↑↑ Has no life Staff Member 5+ Years 1000 Posts Platinum Contributor

    to remove a serpenteine can be done 2 ways....well it's actually one, but you can use two different tools to get it done with. First, you can take a serpenteine belt tool and crank the bolt at the pulley to the left to loosen it temporarily. The other way is to take a socket and ratchet and do the same thing. Don't worry, that bolt is reverse-threaded, so it won't loosen, only tighten when you do this. Good luck!
     
  3. Kraziken

    Kraziken Rockstar 100 Posts

    I figured it out shortly after I made this post. Thanks! :happy:
     

Share This Page