1. Welcome To GMTruckClub.com!

    The #1 Chevy Truck Forum Online
    Online since 2004, we are the #1 Chevy Truck & SUV forum and user community. If you have any questions about your Chevy or GMC Truck, SUV or Crossover, or just want to connect with other GM owners and enthusiasts around the world, you've found the best place on the internet to do that.

    Join Today ~ It's Free
    Registering is Free and Easy! Hope to see you on the forums soon!

New Member

Discussion in 'Member Introductions' started by Williys, Aug 8, 2009.

  1. Williys

    Williys New Member

    Hi my user name is Willys, my 1939 Willys is powered by a 4.3 engine and 700r4 trans., I have a 1969 cst10 pickup as well as a 1985 Silverado w/a 454 fuel injected conversion and 4 wheel drive, our van is a 2003 Astro which I am currently working on. Changing out the axle bearings I found a small roller bearing in my cleanup rag,it is about 3/16 thick and a 1" or so long. I can't find a picture of this differential that shows the detail to reveal the origin of this piece of roller bearing. If you have a schematic or idea where this is from Please let me know as I won't put it together without figuring out this part.

    Thanks and Nice to Meet You,
    Willys:great:
    Last edited: Aug 8, 2009
  2. 99'HEARTBEAT

    99'HEARTBEAT Epic Member Staff Member 5+ Years ROTM Winner 1000 Posts Platinum Contributor

    :sign0016:to the site Willys,from Calif. :glasses:
  3. retired2001

    retired2001 Epic Member 5+ Years 5000 Posts

    Welcome to the site! Sounds like you've got plenty of GM experience! Hopefully someone will be along with the info' you need. Good luck!
  4. 2ToNe04

    2ToNe04 Epic Member 5+ Years 1000 Posts

    try to get a 5.7 :) ftw


    welcome to the site by the way.
  5. canislupis69

    canislupis69 Epic Member 5+ Years ROTM Winner 5000 Posts

    Welcome to the site!
  6. ct9a

    ct9a Epic Member 5+ Years 1000 Posts

    Welcome to the site!
  7. tattooed4life

    tattooed4life Epic Member 5+ Years 500 Posts

    Welcome to the site!
  8. 5speedsilverado

    5speedsilverado Epic Member 5+ Years 1000 Posts

  9. bry2500

    bry2500 Epic Member 5+ Years 1000 Posts

    Welcome to the site!!!

    I was trying to find some cross sections of the bearing assys but came up with nothing. I keep looking though.
  10. Z71_guy

    Z71_guy Epic Member 5+ Years 1000 Posts

    welcome to the site

Share This Page