1. Welcome To GMTruckClub.com!

    The #1 Chevy Truck Forum Online
    Online since 2004, we are the #1 Chevy Truck & SUV forum and user community. If you have any questions about your Chevy or GMC Truck, SUV or Crossover, or just want to connect with other GM owners and enthusiasts around the world, you've found the best place on the internet to do that.

    Join Today ~ It's Free
    Registering is Free and Easy! Hope to see you on the forums soon!

Newbie currently in Sioux City Iowa

Discussion in 'Member Introductions' started by matt.olblue, Nov 17, 2011.

  1. matt.olblue

    matt.olblue New Member

    No current problems, see signature for my vehicles. I am curious about some programming and tire size restrictions that I'm on here to look for. I am a travel Registered Nurse, and a former heavy truck mechanic. I believe in synthetic oil and proper engine warm up. My 01 has 249,000 miles with an O2 sensor replacement and a "Knock"? sensor replacement (under the intake).
    Thanks for sharing.
  2. Red Z71 Max

    Red Z71 Max New Member ROTM Winner 1000 Posts

    Welcome to the Club!!! You may want to try the Tech area for this question and good luck!!!
  3. GMCErica

    GMCErica New Member Platinum Contributor 1000 Posts

    Welcome to the Club! There are lots of great members on here, with great advice and knowledge. Hopefully someone can help you out! Enjoying posting!!
  4. Burden33

    Burden33 New Member

    Welcome to the club your best option is to post it on the tech section you will get better help in there.
  5. Caddiac

    Caddiac New Member 1000 Posts

    Welcome aboard!
  6. Chevy Girl

    Chevy Girl Member Platinum Contributor

    welcome to the site! someone should be able to help out.
  7. matt.olblue

    matt.olblue New Member

    Burden33, How much lift are you running to clear those 315 70 17's? My 01 1500 has a Pro-Comp 3 inch body with the torsion bars tweaked just enough to level it out and I'm running 315 75 16 Buckshot Maxxis Mudders.
  8. Burden33

    Burden33 New Member

    Im running the fabtech 6 inch lift
  9. Eddie Z71

    Eddie Z71 Active Member 1000 Posts

    Welcome to the site! Glad to have you here!
  10. retired2001

    retired2001 New Member 1000 Posts

    Welcome to the G M T C !

Share This Page