NG from the Netherlands with question

Discussion in 'Member Introductions' started by Hakman, Feb 14, 2009.

  1. Hakman

    Hakman New Member

    Hi,

    I recently bought a 04 Suburban Z71 and after two weeks the exterior mirrors stop working. They still fold in and out and curbview still works. Only when I have the side selecter set to L of R the mirros won't operate. Any ideas?

    Hakman
  2. dwill3015

    dwill3015 New Member

    Welcome to the site Hackman! Hopefully another member on here with those type of folding mirrors will help answer your question.
  3. retired2001

    retired2001 New Member

    Welcome to the site! As far as the mirrors go, if mine isn't in the "center" setting they won't fold in or out. Maybe I'm not understanding your queston, is it that you can't the left or rigiht independently?
  4. ct9a

    ct9a New Member

    Welcome to the site! Sounds to me like the switch isn't working properly.
  5. Hakman

    Hakman New Member

    Thanks for the replies so far. I will definitely check the rocker switch!

    Hakman
  6. cascott325

    cascott325 New Member

    welcome to the site
  7. bry2500

    bry2500 New Member

    Welcome to the site!! I agree with the switch as the likely culprit.
  8. tlperry68

    tlperry68 New Member

    Welcome to the site.
    It sounds like a wire came loose.
  9. Hakman

    Hakman New Member

    Anybody knows how to take off the door liner? Or maybe somebody has a repair manual (software) he can sent me?

    Hakman
  10. johnsstart

    johnsstart New Member

  11. MWright936

    MWright936 New Member

    Welcome! Good luck on the fix!
  12. Hakman

    Hakman New Member

    Problem solved!!!

    It turned out to be a sequencing problem. My wife didn't know how to unfold the mirrors and pushed them out by hand.... :lol: .So the system thought the mirros were folded in an therefor the power function was shut off.

    Thanks for all the support!

    Hakman
  13. Darstedly

    Darstedly New Member

    Don't you love a mystery that gets solved? Welcome to the site.

Share This Page