Newest Gallery Photos

  1. Chevy Truck Forum

    Welcome To!

    The #1 Chevy Truck Forum Online

    Online since 2004, we're the #1 Chevy Truck & SUV user community. If you have any questions about your Chevy or GMC Truck, SUV or Crossover, or just want to connect with other GM owners and enthusiasts around the world, you've found the best place on the internet to do that.

    Join Today ~ It's Free

    Registering is Free and Easy! Do it today and we'll see you on the forums soon!

NP 246 Transfer Case

Discussion in 'Chevy Silverado Forum (GMC Sierra)' started by Bavarian, Feb 15, 2013.

  1. Bavarian

    Bavarian New Member

    Hello, I hope Someone can help me!

    I´d like to repair my transfer case on my 2000 Sierra Z71.

    Now, the transfer case is removed and I need a part, very quick.

    I can not find the part in the internet, so I hope this great forum has an answer :)

    I need the part with the number "5" on the diagramm...

    Thank You very much for Your answers!!!

    EDIT: Its the name "SHIMS"

    Greetings from Bavaria! 246_2_SHIMS.jpg
  2. paracutin

    paracutin Rockstar 100 Posts

  3. Bavarian

    Bavarian New Member

    can You tell me what Part Number is the Clutch Rebuild Kit on the drivetrain side?
    Thany You very much!
  4. paracutin

    paracutin Rockstar 100 Posts

    I called They tell me that there is no part number available for the shim and it does not come in any rebuild kit. Perhaps from the dealer?
  5. Bavarian

    Bavarian New Member

    Thank You very much, in Germany i called some the Chevrolet Dealer, but not one of them get parts of Silverados or Sierras...
    I found one dealer in ebay, but hes not going to send to germany, this must be the right rebuild kit:

    I would like to buy the complete rebuild kit, if it`s no chance to get the part alone...
    But there I found nothing part number, too.
    Last edited: Feb 15, 2013
  6. paracutin

    paracutin Rockstar 100 Posts

    What happened to yours? Was it damaged?
    The guy at said that the shim is .060" ~ .062" in thickness. (1.52mm~1.57mm)
  7. Bavarian

    Bavarian New Member

  8. paracutin

    paracutin Rockstar 100 Posts

    It is not in any kit that they have. He cannot get them.
  9. Bavarian

    Bavarian New Member

    Ok, I think i go to an "metal-worker" how makes me an special-mode of the shim.
    Thank You very much for Your great help!!!
    Greetings, Bavaria!!!
  10. paracutin

    paracutin Rockstar 100 Posts

    How did it go? Were you able to get your transfer case working again?

Share This Page