Painted bowtie, removed pin-strip

Discussion in 'Chevy Truck Accessories' started by TylerR04, Jul 2, 2008.

  1. TylerR04

    TylerR04 Rockstar

    I finally removed the pin-strip and painted the bowtie silver!...I hate gold...
    Last edited: Aug 1, 2008
  2. MWright936

    MWright936 Epic Member 5+ Years 1000 Posts

    Looks good man! Great job on the bowtie! It looks like one of the billet ones you can buy for $40+! What kind/color of paint did you use?
  3. freddie

    freddie Rockstar 100 Posts

    That looks great man! I have been thinking about doing that to mine since I have read how to do it on here.
  4. TylerR04

    TylerR04 Rockstar

    I used Krylon Fusion silver metallic color and Krylon clear glaze. I did 4 light coats of the color to make sure there were no runs and waited about 30 - 45 minutes in between each coat. Same with the clear glaze. The can says that one coat of the glaze is the equivilant of 3 coats of clear coat. I also let the bow tie sit over night to make sure everything was dry completly. I think everything turned out really well and it only cost me 5 bucks.
  5. asstda2b

    asstda2b Rockstar GMTC Chick 100 Posts

    Very nice.
  6. 383man

    383man Epic Member 5+ Years 500 Posts ROTM Winner

    damn nice, i like the silver on black.

Share This Page

Newest Gallery Photos