1. Welcome To GMTruckClub.com!

    The #1 Chevy Truck Forum Online
    Online since 2004, we are the #1 Chevy Truck & SUV forum and user community. If you have any questions about your Chevy or GMC Truck, SUV or Crossover, or just want to connect with other GM owners and enthusiasts around the world, you've found the best place on the internet to do that.

    Join Today ~ It's Free
    Registering is Free and Easy! Hope to see you on the forums soon!

Power adjustable pedals non-functioning

Discussion in 'Chevy Suburban Forum (GMC Yukon XL)' started by pab062324, Jun 24, 2007.

  1. pab062324

    pab062324 New Member

    Could someone please help get my wife off my back. We have an '04 burb and the PAPs will not work. I have changed the 15 amp fuse but no luck. The only two things I know to check now are:

    1. Harness connection to the controllers within the door trim.
    2. Use a test lamp to make sure power is making it to the PAP motor. Only problem w/ this is...I don't know where that is. I cannot find any pictures, diagrams, anything that can help. I don't want to just start pulling harnesses.

    Any comments/suggestions would be most appriciated. Thanks.

    Paul
  2. 84fiero123

    84fiero123 Epic Member 5+ Years 1000 Posts Platinum Contributor

    Sorry to hear that they are not working, also sorry that I can be of no more help than to give you a bump to the top.

    My signature says it all.

Share This Page