quick Q

Discussion in 'Chevy Truck Accessories' started by zach45, Oct 13, 2008.

  1. zach45

    zach45 New Member

    i have a 1500 gasser
    some jerkoff hit my mirror and sped away today when comming home from my upstate house..

    my Q is can i add turing signals or heated mirrors to my truck which is just power adjustable mirrors? or do i need to buy the same exact mirror?
  2. Browntowns20s

    Browntowns20s New Member

    you can buy upgrade kits typically aftermarket with blinkers and all that crap, but i think you will have to wire all of them, i dont think any of them come as plug and play
  3. zach45

    zach45 New Member

    thanks...
    well with my magic fingers i fixxed the mirror but need the upper and lower covers..
  4. adidasboy918

    adidasboy918 New Member

    doesnt your truck have the heated mirrors on it already?
  5. zach45

    zach45 New Member

    not that i knwo ofn
  6. adidasboy918

    adidasboy918 New Member

    is your truck a LS or a LT?
  7. zach45

    zach45 New Member

    lt
    how would i know?
  8. zach45

    zach45 New Member

    i checked i do have it...
    2 wires leading into the glass... i turned on my re de-fogger and it got hot...
  9. Never Enough

    Never Enough New Member

    Should be all wired up for it already. You should be able to just swap out the mirror.
  10. zach45

    zach45 New Member

    can i put the turning signal one?
  11. Never Enough

    Never Enough New Member

    Bear in mind I'm not 100% positive, but if its anything like the other dealer options, it should already be wired for it. Just a matter of bolting the appropriate hardware on the truck. No different than the trans gauge on the 03's or the upgraded seats. Wiring is already in place for it. Makes it a lot easier for them on the assembly line.
  12. zach45

    zach45 New Member

    thats what im thinking..
    i wanna try...
  13. wallstetter

    wallstetter New Member

    would it be the same thing for an older gm like an 2004?
  14. 04sierracrewcab

    04sierracrewcab New Member

    :rofl::sign0173:
  15. zach45

    zach45 New Member

    LOL ... i know i did it ...
    [​IMG]
  16. 04sierracrewcab

    04sierracrewcab New Member


    yay! for zach!!!! :lol::lol: :rofl:
  17. Never Enough

    Never Enough New Member

    give a call to the dealership - they should be able to give you a simple yes or no.
  18. zach45

    zach45 New Member

    yea ill get around to making that phone call sooner or later...
    thanks guys
  19. zippy

    zippy New Member

    If you're prewired for mirror signals, then the wires have to go thru the door umbilicus. Check your schematic for the appropriate wire color code (Lt and Dk Blue?), and then pull the rubber back for a look at the wires. If you see the correct colored wires, then the hard part was done at the factory.
    Good luck!

Share This Page