Discussion in 'Member Introductions' started by rab12341, Jan 24, 2011.

  1. rab12341

    rab12341 New Member

    hey guys, richard here from oklahoma got a question for all you professional transfer case rebuilders out there went to drain the case and accidential pulled the top and bottom rods? or plugs not sure what they are called but i guess they held the shifting gears went to put them back in and the case is stuck in 4 wheeo drive and they have shifted!!!!cant even get them in all the way.....HELP:grrrrrr::grrrrrr::grrrrrr::grrrrrr:
  2. Welcome to the club. What year and type of truck and transfer case???
  3. rab12341

    rab12341 New Member

    hi there first off thanks for the reply dead in the water without my tuck...thx...its a 2000 silverdo 2500 4x4 and the transfer case is a nvg . thx for the help
  4. Vincennes02261897

    Vincennes02261897 New Member

    Welcome to the club! I hope you get the answers you need.
  5. stephan

    stephan New Member

    Hey Rab, sorry I can't help you with the transfer case but you're in good hands with STB & welcome to the club.
  6. rab12341

    rab12341 New Member

    thx guys i will hust keep plugging away
  7. Bigbomber

    Bigbomber New Member

  8. canislupis69

    canislupis69 New Member

    Welcome to the club!
  9. retired2001

    retired2001 New Member

    Welcome to the G M T C ! If you don't get some info' soon, you might want to post a question in the Maint. forum that fits best. Good luck!
  10. rab12341

    rab12341 New Member

    thx retired enjoying you 4 wheeling
  11. murdog94

    murdog94 New Member

    Welcome aboard!

Share This Page