1. Welcome To GMTruckClub.com!

    The #1 Chevy Truck Forum Online
    Online since 2004, we are the #1 Chevy Truck & SUV forum and user community. If you have any questions about your Chevy or GMC Truck, SUV or Crossover, or just want to connect with other GM owners and enthusiasts around the world, you've found the best place on the internet to do that.

    Join Today ~ It's Free
    Registering is Free and Easy! Hope to see you on the forums soon!

Radio Unlock Codes [Expired Topic]

Discussion in 'Chevy Suburban Forum (GMC Yukon XL)' started by Dr_Zero, May 8, 2006.

Thread Status:
Not open for further replies.
  1. Dr_Zero

    Dr_Zero New Member

    There was a request in the tagbox for help in unlocking their radio, I found this post on another forum and thought it might help them and all of us just in case.

    kdunville
    Junior Member
    Registered Member

    Join Date: Oct 2005
    Location: Prince Edward Island Canada
    Posts: 1

    Lightbulb Try this
    Quote:
    Originally Posted by clarkje
    2000 Chevy S10 pickup, battery died, replaced, radio now locked out due to theft deterrent system. Dealer wants $30 to unlock it; probably a 5 minute job. Does one have self service cheaper options to get the code and instructions to unlock the radio?

    Try this, it worked for my 1998 Sunfire and a 1975 Monte Carlo.
    Press & hold the 2 & 3 buttons @ the same time for about 10 seconds; a 2 or 3 digit code will appear, write this # down,press & hold the am/fm button for about 10 seconds: another code will appear, write this # down, then call 1-800-537-5140 and enter 202108 followed by the # key, then enter the #'s that you wrote down from your radio followed by the * key. The call will give you a 3 or 4 digit override code. Write this code # down so you have it if you ever need it again. Enter this # into your radio following the instructions in your owners manual. If you get an override code that starts with 0, you drop the 0 when entering the code into your radio.
    If you don't have an owners manual, try this, press & hold the hour button until the first 2 digits of your code come up, then press & hold the minute button until the last 2 digits show. Then press the am/fm button. This should reset your stereo. It did mine.
    Hope you find this helpful.
  2. GaryL

    GaryL New Member ROTM Winner Platinum Contributor 1000 Posts

    Where do they come up with idea of how these things should be set up. It's almost as difficult as programming your remote.

    Thanks for the info.
Thread Status:
Not open for further replies.

Share This Page