1. Welcome To GMTruckClub.com!

    The #1 Chevy Truck Forum Online
    Online since 2004, we are the #1 Chevy Truck & SUV forum and user community. If you have any questions about your Chevy or GMC Truck, SUV or Crossover, or just want to connect with other GM owners and enthusiasts around the world, you've found the best place on the internet to do that.

    Join Today ~ It's Free
    Registering is Free and Easy! Hope to see you on the forums soon!

Rear brake size on '99 Tahoe

Discussion in 'Chevy Tahoe Forum (GMC Yukon, Cadillac Escalade)' started by NE1469, Apr 7, 2008.

  1. NE1469

    NE1469 New Member

    How do you determine whether you have the 10" or 11" brakes on the rear of a '99 Thaoe? I know the easiest would be to take them apart and measure but I would "assume" there should be a way to tell without breaking them down first. Maybe VIN # or can you tell by measuring the outside diameter of the drum? Does anyone know? Thanks.
  2. MrShorty

    MrShorty Moderator Staff Member 1000 Posts

    Even easier than measuring the drum is to find the max diameter that should be stamped on the drum. I can't off-hand remember where it was stamped into the drum, but you should be able to see it by pulling the wheel off. If the max diameter is ~11 inches, you have 11 inch brakes. About 10 inches and you have 10 inch brakes and so on.

Share This Page