1. Welcome To GMTruckClub.com!

    The #1 Chevy Truck Forum Online
    Online since 2004, we are the #1 Chevy Truck & SUV forum and user community. If you have any questions about your Chevy or GMC Truck, SUV or Crossover, or just want to connect with other GM owners and enthusiasts around the world, you've found the best place on the internet to do that.

    Join Today ~ It's Free
    Registering is Free and Easy! Hope to see you on the forums soon!

Removing Door Panels

Discussion in 'Chevy Suburban Forum (GMC Yukon XL)' started by BBslider001, Sep 25, 2012.

  1. BBslider001

    BBslider001 New Member

    I know, newbie question, but I have searched and have not found a "how to" on removing the door panels on my '99. I broke a few tabs today trying to finesse the passenger side off, so before I do the driver side, any input would be greatly appreciated. Thanks!!
  2. Kady

    Kady New Member

  3. AMac

    AMac New Member

    The videos do help but If you're still having trouble go to your local dealer and start asking them questions, they'll pull up the diagram and just say "Hey could you print that out for me?" One day I walked away with schematics for the door panels, front end assembly and rear bumper :money:

    I couldn't get the passenger side off and was wondering what was holding it up the schematics helped me finish the job.
  4. PantheraUncia

    PantheraUncia Active Member 1000 Posts


    AMAC gets the guys at the parts counter to print off anything she wants when she goes in.
  5. SurrealOne

    SurrealOne Former Member 1000 Posts

    All one has to do is ask, so if she asks, yes, I bet she does...
  6. BBslider001

    BBslider001 New Member

    Thanks for posting the video. I will look at it in the morning and see if I can get somewhere with it. They sure did not make it easy to get it on and off.
  7. Jeremy09LTZCrew

    Jeremy09LTZCrew New Member 1000 Posts

    Now the real question is, have you scanned the schematics yet?
  8. Pikey

    Pikey Moderator Staff Member 1000 Posts

    I am pretty sure that you can buy replacement clips at autozone. They should be in the "HELP" packages

Share This Page