1. Welcome To GMTruckClub.com!

    The #1 Chevy Truck Forum Online
    Online since 2004, we are the #1 Chevy Truck & SUV forum and user community. If you have any questions about your Chevy or GMC Truck, SUV or Crossover, or just want to connect with other GM owners and enthusiasts around the world, you've found the best place on the internet to do that.

    Join Today ~ It's Free
    Registering is Free and Easy! Hope to see you on the forums soon!

removing rear axle seals

Discussion in 'Lifted & Offroad Suspension' started by borob47, Feb 15, 2010.

  1. borob47

    borob47 New Member

    Hi .My name is Bob and I tried to introduce myself but couldnt get through? Anyway nice site.I am working on my 1998 Chevy 4x4 1/2 ton Silverado and need help in removing and replacing rear axle seals . Photos or video would be great .Thanks in advance .


    BASSIST Rockstar 100 Posts

    You need to pull the cover off the rear end. Pull the pin and bolt out of the gears, remove the c-clips theat hold the axles in place then pull the axles. Get a seal puller to pull the seals out
  3. seffieldvillage@aol.com

    seffieldvillage@aol.com Rockstar 100 Posts

    hi just thought i would add you have to push the axes in to get the c clip out most of the time.

Share This Page