GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER

replacing cab corners

Discussion in 'Chevy Truck Accessories' started by krazyballer, Jul 18, 2007.

  1. krazyballer

    krazyballer New Member

    Joined:
    Jul 12, 2007
    Messages:
    16
    Likes Received:
    0
    Im looking at a 1994 chevy silverado 1500 reg cab and was wondering how hard would it be to replace the cab corners. Or should i just leave them alone.
    #1
  2. 84fiero123

    84fiero123 New Member

    Joined:
    Jun 13, 2005
    Messages:
    1,682
    Likes Received:
    9
    Didn’t we just answer this for someone?

    Replacing them is not all that difficult. Get rust replacement panels. Cut all the old rust out to match the new cab corners, fit your new cab corners and rivet them in.

    This gives you a nice tight fit for then welding them in. then used body mud and sand and file and primer and paint.

    Job done.
    #2
  3. MD4x4 Fireman

    MD4x4 Fireman New Member

    Joined:
    Jun 5, 2007
    Messages:
    1,119
    Likes Received:
    1
    you just answered it from me in the topic like 2 down titled body work:neutral:
    #3
  4. krazyballer

    krazyballer New Member

    Joined:
    Jul 12, 2007
    Messages:
    16
    Likes Received:
    0
    o0o my bad, well thanks anyways.
    #4
  5. MD4x4 Fireman

    MD4x4 Fireman New Member

    Joined:
    Jun 5, 2007
    Messages:
    1,119
    Likes Received:
    1
    its all good. i used to ask questions that were just answered before
    #5

Share This Page