1. Welcome To GMTruckClub.com!

    The #1 Chevy Truck Forum Online
    Online since 2004, we are the #1 Chevy Truck & SUV forum and user community. If you have any questions about your Chevy or GMC Truck, SUV or Crossover, or just want to connect with other GM owners and enthusiasts around the world, you've found the best place on the internet to do that.

    Join Today ~ It's Free
    Registering is Free and Easy! Hope to see you on the forums soon!

Scanning LED Bar Front End?

Discussion in 'Chevy Truck Accessories' started by ippielb, May 15, 2011.

  1. ippielb

    ippielb Active Member 1000 Posts

    I'm sure you've all seen those LED tailgate bars with the scanning function. I am purchasing one, but i was curious if anyone makes one for the front end. I was debating on just buying another one with white reverse lights, and just make it so that the white LED's are my driving lights, so when i put it into any gear they turn on, and still have the amber scanning turn signals. But that would be a costly "if" i can make it work without wrecking it.

    Anyone know of any bar like this?
  2. ntbush83

    ntbush83 New Member 1000 Posts

    You can buy led strips that are weather proof on ebay from 5-10 bucks. Any color,any length. I used them on my motorcycle are white running lights under my headlights and they look really sharp. Here's a picture.

    Also they are running lights but flash like turn signals as well
    Last edited: May 15, 2011
  3. ippielb

    ippielb Active Member 1000 Posts

  4. ntbush83

    ntbush83 New Member 1000 Posts

    That just blew my mind!!! I need one!

    So what you want is to have it so instead of the white's being used as reverse lights use them as running lights and still have the scanning amber turn signals??
  5. ippielb

    ippielb Active Member 1000 Posts

    You are correct. That's exactly what i want. I want to make it so that the front is the Driving Lights / Daytime Running lights, and that the amber will be turn signals. I don't even want to use the red brake lights. I know that it could work if i could just not wire up the red lights. And just wire the white LEDs into an accessory.
    Last edited: May 15, 2011

Share This Page