Hey all, About 6 months ago I had the Driver seat replaced in my 2003 Silverado. When I picked it up from the shop that night, the service airbag light was on. I'm almost 100% sure it has to do with the wiring under the seat. Does anyone have wiring skematics, or pics of the harness? The harness coming from under the carpet has two blue wires, but they've been spliced together then just one blue wire runs to the harness. I'll take a pic and post it today. Any help is appreciated. - - - Updated - - - Harness from truck. http://i1284.photobucket.com/albums/a574/zlh102089/7769B27A-5C53-46D7-8538-1A6125004409-9247-000002EA3043E6BF_zps0ff3f52c.jpg Harness from seat: http://i1284.photobucket.com/albums/a574/zlh102089/EAC5926F-15AD-4123-BD12-3EE95A6AE82B-9247-000002EA372F1D71_zpsf4e0c677.jpg Connected harnesses: http://i1284.photobucket.com/albums/a574/zlh102089/27DCE563-D106-4344-BD1B-A8440A7F8811-9247-000002EA3DF5E3A1_zps4a052c1f.jpg Green/black go to green/black Blue goes to nothing Orange goes to nothing Both yellows from the seat go to thick black on the truck harness. Does this look correct to anyone?