1. Welcome To GMTruckClub.com!

    Online since 2004, we are the #1 Chevy Truck & SUV forum and user community. If you have any questions about your Chevy or GMC Truck, SUV or Crossover, or just want to connect with other GM owners and enthusiasts around the world, you've found the best place on the internet to do that.

    Registering is Free and Easy! Hope to see you on the forums soon!

Trans noise i think. help [Expired Topic]

Discussion in 'Chevy Suburban Forum (GMC Yukon XL)' started by viken, Aug 2, 2005.

Random Gallery Photos

Thread Status:
Not open for further replies.
  1. viken

    viken New Member

    I have been working on the 96 GMC suburban, K2500 4x4, 454. I've only had it a little over a week, and have been doing all the fluids, the rear end smelled very bad, the transfer looked ok, and the front has a recept from the prev owner last year. So this is why i think its the transmission.
    when you give it gas it makes a grrrrr noise. if you put it in N the noise goes away in an instant. if you give it hard excel it does not make the noise. Also when you let off the gas it still makes the noise for about 3 sec. and than goes away. it comes back when you give it gas again. could this be the t converter. it made the noise the whole way back from texas where i bought it. it's very anoying. thanks for the help.
  2. Guest

    Guest Guest

    RE: Trans noise i think. help

    Have you taken it in for trouble codes? Not all tranny codes trip the S.E.S. light.
  3. ARNIE

    ARNIE New Member

    Does that truck have a lift kit in it?
  4. viken

    viken New Member

    no it looks stock. no lift just different wheels.i put new grease in all joints also, the steering, some type of upper joint on a frame, and on the shaft that comes out of the tansfer case going to the front end. what do you mean code. i did not know that the transmisison gives off codes.
  5. 84fiero123

    84fiero123 New Member Platinum Contributor 1000 Posts 100 Posts

    trans in the newer one are elec inside and are in the computer allowing the computer to control things. have the trouble codes checked. but first pull the dipstick out, smell the fluid on the dipstick, if you have burnt clutches in the trny it will smell like burnt almounds.
  6. viken

    viken New Member

    noise is gon e i changed the fluid and filter with mbl 1 runs better and noise is gone.
  7. ChevyFan

    ChevyFan Administrator Staff Member 1000 Posts

    I forget, did you say that this has a shift kit or not?
Thread Status:
Not open for further replies.

Share This Page