1. Chevy Truck Forum

    Welcome To GMTruckClub.com!

    The #1 Chevy Truck Forum Online

    Online since 2004, we're the #1 Chevy Truck & SUV user community. If you have any questions about your Chevy or GMC Truck, SUV or Crossover, or just want to connect with other GM owners and enthusiasts around the world, you've found the best place on the internet to do that.

    Join Today ~ It's Free

    Registering is Free and Easy! Do it today and we'll see you on the forums soon!

tune up for 4.3 blazer

Discussion in 'General Chevy & GM Tech Questions' started by vncj96, Jul 22, 2011.

  1. vncj96

    vncj96 Epic Member 5+ Years 1000 Posts

    So the passanger side looks ok but am I assuming correctly you have to go through the wheel well to get to the drivers side plugs?? It looks a little to cramped to get my big mitts in there! This is a 98.
     
  2. wis bang

    wis bang Rockstar 100 Posts

    That is how we did my '93.
     
  3. Badbrad469

    Badbrad469 Rockstar 100 Posts

    that's how i always changed mine when i had them.
     
  4. murdog94

    murdog94 Epic Member 5+ Years 5000 Posts

    Yes and if you have a Plug Socket with a swivel built in that will make it the easiest to get the #3 plug out from behind the steering shaft.
     
  5. Chris Miller

    Chris Miller Rockstar 100 Posts

    Ewww.....yeah, my neighbor had one, that was also in a minor collision. The steering shaft had been moved ever-so-slightly, and made it near-impossible to get the driver's side plugs out.
     
  6. Badbrad469

    Badbrad469 Rockstar 100 Posts

    x2 the back drivers side was always the hardest plug to get out
     

Share This Page