Want to install a Dual Ram Air Intake....

Discussion in 'GM Powertrain' started by ayrron, Jun 15, 2013.

  1. ayrron

    ayrron New Member

    I have a 2009 Silverado 1500 5.3 with a ram air hood and want to put a dual ram air intake on it does any body
    Know where I can get one with out spending $500 or know how to make one
  2. donyms

    donyms New Member

    Welcome to the club, it's great to have you aboard. I don't know about ths dual intake for your model but I am sure someone will be along soon that can help. :glasses:
  3. 99'HEARTBEAT

    99'HEARTBEAT Moderator Staff Member

    ****Thread Moved****
    To The
    GM Powertrain Tech Section

  4. Goldie

    Goldie New Member

  5. Enkeiavalanche

    Enkeiavalanche Moderator

    I've seen some on old Chevy's at shows.. Which hood do you have?
  6. ayrron

    ayrron New Member

    IMG_20130412_171200_846.jpg
    This is the hood
  7. Enkeiavalanche

    Enkeiavalanche Moderator

    is that a Goodhood or Cervini's? GH hoods bring the little air that enters to the air box on the left, The Cervini's is open and brings the little air right over the top of the motor I have the Cervini hood.. newav3.jpg The black Av has the Goodhood his is also cracked by the prop rod
    Last edited: Jun 16, 2013
  8. ayrron

    ayrron New Member

    Its a cervini's hood and where did u get the screen u have I. The hood they look good
  9. Enkeiavalanche

    Enkeiavalanche Moderator

    Not home now will post better pics later But it's my old grille Got into a little fender bender a while ago and we used what was left of my factory grille..
  10. ayrron

    ayrron New Member

    I want to give my truck more power and more show I have ram air hood cold air intake 24in wheels leveling kit
    Billet grill led tail lights inside is painted to match the out side very loud dual exhaust. Coming out the sides right behinds the side steps any ideas would help and I won't lower the truck
  11. Enkeiavalanche

    Enkeiavalanche Moderator

    175resize.jpg here are some better pics of my hood. Opps sorry that pic always comes up....:gasp: 091.jpg You should make the trip down to Carlisle, Pa for the big truck show in Aug you will get Plenty of idea's..
  12. ayrron

    ayrron New Member

    When and where exactly is it

    - - - Updated - - -

    When and where exactly is it
  13. nonnieselman

    nonnieselman New Member

    Whats the under side of that hood look like?

    Best bet is goin to be making some rams that go from the hood to the air box thats enclosed.
  14. Enkeiavalanche

    Enkeiavalanche Moderator

  15. ayrron

    ayrron New Member

    That's exactly what I want but can't find one for my truck and I don't know where to start to make one
  16. nonnieselman

    nonnieselman New Member

    Twin Ram Air :D
    [​IMG]

    - - - Updated - - -

    Your goin to have to get creative if you want to do the ram air from the hood. no two ways about it.

    Just goin to lose some bottom end power and possible gain some top end power when you get up in the mph. But how much and is it worth it?
  17. ayrron

    ayrron New Member

    Well I want to add more power to my truck so is it worth doing it I just thought having the hood it would be better to have the intake to match and what about a programmer like edge or bully dog I was told they don't do anything for gas trucks

Share This Page